Frequently Asked Questions
1” Pipe & Hose Ramps:
Q: What is the biggest hose/pipe I can fit?
A: 1.5” O.D.
Q: Will this support large vehicles?
A: This is not meant for heavy traffic.
Q: Can it be cut down to a size less than 10-feet?
A: Yes, and you will have the left-over portion as well.
2” Pipe & Hose Ramp:
Q: What is the biggest hose/pipe I can fit?
A: 2.5” O.D. (outside dimension)
Q: Will this support heavy/large vehicles?
A: Yes, up to class 9.
2.5 Speed Bumps:
Q: Can this be installed on a dirt/gravel road?
A: Yes. We recommend that you use at least 24” rebar spikes for installation or earth anchor screws. The material is EPDM rubber which allows the Speed Bumps to work on uneven ground.
Q: Do you have end caps?
A: We cut 3-foot unit in half, then cap off the Speed Bump strip with each half with the flush cut on the outside.
Q: Do I need hardware?
A: This depends on how long of a Speed Bump you want to make. The more Speed Bumps you connect, the stronger it becomes. In high traffic areas, we recommend that you use hardware. Our hardware kits come with 4 bolts, 4 anchors sleeves and 4 washers and adhesive.
Q: What speed will these slow vehicles down to?
A: This will slow drivers down to 5-10mph.
3" Speed Bump:
Q: Can this be installed on a dirt/gravel road?
A: Yes. We recommend that you use at least 24” rebar spikes for installation or earth anchor screws. The material is EPDM rubber which allows the Speed Bumps to work on uneven ground.
Q: Do you have end caps?
A: We cut 3-foot unit in half, then cap off the Speed Bump strip with each half with the flush cut on the outside.
Q: Do I need hardware?
A: This depends on how long of a Speed Bump you want to make. The more Speed Bumps you connect, the stronger it becomes. In high traffic areas, we recommend that you use hardware.
Q: What speed will these slow vehicles down to?
A: This will slow drivers down to 3-5mph.
Q: Does it come with reflectors?
A: Our 3” Speed Bump has the ability to have safety-yellow stripes painted on both sides of the bump.
Cable Support Tower:
Q: What are the sizes in the antlers?
A: The top chamber is 4” and the chambers running down the sides are 2.5”.
Q: How far apart do I need to space them out?
A: This depends on the weight, but about 10-feet per tower.
Q: How much weight can this support?
A: Do not exceed 100 pounds.
Q: Do I need the base weight?
A: This depends on what you will be supporting. If there are hoses with water running through them or you have multiple heavy cables, you should have extra weight for more support.
Engineered Traffic Curb:
Q: Can it bend?
A: No.
Q: Can this be removed?
A: Yes. These can be permanently or semi-permanently installed.
Engineered Rubber Curb:
Q: Can this be cut for 90-degree turns?
A: Yes - For custom fabrications visit rubberform.com
Q: Can this be removed?
A: Yes. These can be permanently or semi-permanently installed.
Portable Bollard Base:
Q: How do I set it up?
A: Everything is prepared for you. The bollard is already attached to the post. Simple stick the post into the base and you are all set.
Q: Do I need the base weight?
A: Anything higher than 6-feet, we recommend you add the base weight to ensure safety and limit liability.
Q: What kind of colors can I get?
A: We can provide multiple colors. Anything other than the stocked colors we have (Yellow, Red, Blue, Black) we will need 2-week notice to provide that specific colored bollard.
Portable Sign Base:
Q: Do I need the base weight?
A: If you plan on having a sign on a post higher than 6-feet, we recommend that you add the base weight. Also, the larger the sign, the more weight you will want to wind does not blow it over which could result in property/car damage.
Q: Do I need to fill up the Sign Base?
A: No. Our Sign Bases are 75-pounds and are compression molded recycled crumb rubber. Simply put your post in and you’re all set.
Q: Can I get it in white or another color?
A: We have safety yellow covers that go on top of the base; however, the standard base will always be black.
Rooftop Pavers:
Q: Will these allow water to filter through?
A: Yes. They have bumps on the bottom that raise the Pavers up to allow water to filter through
Q: How do they interconnect?
A: All four sides of the paver have (2) holes for dowels to connect pavers to each other.
Q: Can I put an HVAC system on top?
A: Yes.
Q: Can I put a ladder on top of the pavers?
A: Yes.